Filter
Top Products
Setting Tributary SignalPDH Transmit Parameters
3–92
CTS 710 SONET Test Set User Manual
NOTE. When settings are coupled from the TRANSMIT SETTINGS
page, the receive parameters are changed to match the transmit
parameters. Conversely, when settings are coupled from the
RECEIVE SETTINGS page, the transmit parameters are changed to
match the receive parameters.
Notice that the signal status icons, in the upper-right corner of the
display, changed to reflect the coupling of the settings.
To change transmit and receive settings so that they are no longer
coupled:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
Tx/Rx Settings Independent
Notice that the signal status icons, in the upper-right corner of the
display, changed to indicate that the settings are no longer coupled.
Setting the Transmit Clock
To specify the transmit clock:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
Transmit Clock Internal
Recovered
External BITS
External DSn
H Select Internal to set the transmit clock to the internal clock.
Setting Tributary SignalPDH Transmit Parameters
3–92
CTS 710 SONET Test Set User Manual
NOTE. When settings are coupled from the TRANSMIT SETTINGS
page, the receive parameters are changed to match the transmit
parameters. Conversely, when settings are coupled from the
RECEIVE SETTINGS page, the transmit parameters are changed to
match the receive parameters.
Notice that the signal status icons, in the upper-right corner of the
display, changed to reflect the coupling of the settings.
To change transmit and receive settings so that they are no longer
coupled:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
Tx/Rx Settings Independent
Notice that the signal status icons, in the upper-right corner of the
display, changed to indicate that the settings are no longer coupled.
Setting the Transmit Clock
To specify the transmit clock:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
Transmit Clock Internal
Recovered
External BITS
External DSn
H Select Internal to set the transmit clock to the internal clock.