Filter
Top Products
Working with Test Setups
3–46
CTS 710 SONET Test Set User Manual
4. Enter an operator start prompt as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TEST SETUPS SAVE PASS/FAIL
TESTS
Operator Start
Prompt
Default
Clear
Preview
EDIT TEXT
H Select Default to enter the default prompt TEST IS ABOUT
TO START!.
H Select Clear to remove any previously entered prompt text.
H Select Preview to see how the prompt text you have entered
appears in the pass/fail test dialog box. Select EXIT to
remove the preview.
H Select EDIT TEXT to enter an operator start prompt, up to
72 characters long. The prompt appears on the display as
three lines of 24 characters. Select DONE when you are
finished editing the prompt.
Working with Test Setups
3–46
CTS 710 SONET Test Set User Manual
4. Enter an operator start prompt as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TEST SETUPS SAVE PASS/FAIL
TESTS
Operator Start
Prompt
Default
Clear
Preview
EDIT TEXT
H Select Default to enter the default prompt TEST IS ABOUT
TO START!.
H Select Clear to remove any previously entered prompt text.
H Select Preview to see how the prompt text you have entered
appears in the pass/fail test dialog box. Select EXIT to
remove the preview.
H Select EDIT TEXT to enter an operator start prompt, up to
72 characters long. The prompt appears on the display as
three lines of 24 characters. Select DONE when you are
finished editing the prompt.