Filter
Top Products
D-Link DWS-1008 CLI Manual 138
• RFDetectSpoofedMacAPTraps—Generated when MSS detects a wireless packet with the
source MAC address of a D-Link AP, but without the spoofed MP’s signature (fingerprint).
• RFDetectSpoofedSsidAPTraps—Generated when MSS detects beacon frames for a
valid SSID, but sent by a rogue AP.
• RFDetectUnAuthorizedAPTraps—Generated when MSS detects the MAC address of an
AP that is on the attack list.
• RFDetectUnAuthorizedOuiTraps—Generated when a wireless device that is not on the
list of permitted vendors is detected.
• RFDetectUnAuthorizedSsidTraps—Generated when an SSID that is not on the permitted
SSID list is detected.
all Sends or drops all notifications.
Defaults: A default notification profile (named default) is already configured in MSS. All notifications
in the default profile are dropped by default.
Access: Enabled.
Examples: The following command changes the action in the default notification profile from
drop to send for all notification types:
DWS-1008# set snmp notify profile default send all
success: change accepted.
The following commands create notification profile snmpprof_rfdetect, and change the action to
send for all RF detection notification types:
DWS-1008# set snmp notify profile snmpprof_rfdetect send
RFDetectAdhocUserTraps
success: change accepted.
DWS-1008# set snmp notify profile snmpprof_rfdetect send
RFDetectClientViaRogueWiredAPTraps
success: change accepted.
DWS-1008# set snmp notify profile snmpprof_rfdetect send RFDetectDoSTraps
success: change accepted.
DWS-1008# set snmp notify profile snmpprof_rfdetect send
RFDetectAdhocUserTraps
success: change accepted.
DWS-1008# set snmp notify profile snmpprof_rfdetect send
RFDetectInterferingRogueAPTraps
success: change accepted.