Filter
Top Products
D-Link DWS-1008 CLI Manual 16
clear system
Clears the system configuration of the specified information.
Syntax: clear system [contact | countrycode | idle-timeout | ip-address | location |
name]
contact
countrycode
idle-timeout
ip-address
location
name
Defaults: None.
Access: All.
Examples: To clear the location of the switch, type the following command:
DWS-1008# clear system location
success: change accepted
Resets the name of contact person for the DWS-1008 switch to null.
Resets the country code for the DWS-1008 switch to null.
Resets the number of seconds a CLI management session can remain idle
to the default value (3600 seconds).
Resets the IP address of the DWS-1008 switch to null.
Resets the location of the DWS-1008 switch to null.
Resets the name of the DWS-1008 switch to the default system name,
which is DWS-mmmm-nnnnnn, where mmmm is the model number and
nnnnnn is the last 6 digits of the switch’s MAC address.