Filter
Top Products
D-Link DWS-1008 CLI Manual 518
delete
Removes the currently active boot profile.
Syntax: delete
Defaults: None.
Access: Boot prompt.
Usage: When you type the delete command, the next-lower numbered boot profile becomes the
active profile. For example, if the currently active profile is number 3, profile number 2 becomes
active after you type delete to delete profile 3. You cannot delete boot profile 0.
Examples: To remove the currently active boot profile, type the following command:
boot> delete
BOOT Index: 1
BOOT TYPE: c
DEVICE: boot1:
FILENAME: default
FLAGS: 00000000
OPTIONS: run=nos;boot=0
See Also:
• change
• create
• next
• show
dhcp
Displays or changes the state of the DHCP option. The DHCP option controls whether a switch
uses DCHP to obtain its IP address when it is booted using a TFTP server.
Syntax: dhcp [ON | on | OFF | off]
ON Enables the DHCP option.
on Same effect as ON.
OFF Disables the DHCP option.
off Same effect as OFF.