Filter
Top Products
D-Link DWS-1008 CLI Manual 173
Defaults: None.
Access: Enabled.
Note: The syntax descriptions for the clear authentication commands have been separated for
clarity. However, the options and behavior for the clear authentication console command are
the same as in previous releases.
Examples: The following command clears authentication for administrator Regina:
DWS-1008# clear authentication console Regina
success: change accepted.
See Also:
• clear authentication admin
• clear authentication dot1x
• clear authentication mac
• clear authentication web
• set authentication console
• show aaa
clear authentication dot1x
Removes an 802.1X authentication rule.
Syntax: clear authentication dot1x {ssid ssid-name | wired} user-glob
ssid ssid-name SSID name to which this authentication rule applies.
wired Clears a rule used for access over a switch’s wired-authentication port.
user-glob User-glob associated with the rule you are removing.
Defaults: None.
Access: Enabled.
Examples: The following command removes 802.1X authentication for network users with
usernames ending in @thiscorp.com who try to access SSID finance:
DWS-1008# clear authentication dot1x ssid finance *@thiscorp.com
See Also:
• clear authentication admin
• clear authentication console
• clear authentication mac
• clear authentication web
• set authentication dot1x
• show aaa