Filter
Top Products
D-Link DWS-1008 CLI Manual 338
set radio-profile auto-tune power-config
Enables or disables dynamic power tuning (RF Auto-Tuning) for the DWL-8220AP radios in a
radio profile.
Syntax: set radio-profile name auto-tune power-config {enable | disable}
name
enable
disable
Defaults: Dynamic power assignment is disabled by default.
Access: Enabled.
Usage: When RF Auto-Tuning for power is disabled, MSS does not dynamically set the power
levels when radios are first enabled and also does not tune power during operation with associated
clients.
When RF Auto-Tuning for power is enabled, MSS does not allow you to manually change the
power level.
Examples: The following command enables dynamic power tuning for radios in the rp2 radio
profile:
DWS-1008# set radio-profile rp2 auto-tune power-config enable
success: change accepted.
See Also:
• set {ap | dap} radio auto-tune max-power
• set radio-profile auto-tune channel-config
• set radio-profile auto-tune power-interval
• set radio-profile auto-tune power-lockdown
• set radio-profile auto-tune power-ramp-interval
• show radio-profile
Radio profile name.
Configures radios to dynamically set their power levels when the DWL- 8220APs
are started.
Configures radios to use their statically assigned power levels, or the default
power levels if unassigned, when the radios are started.