Filter
Top Products
D-Link DWS-1008 CLI Manual 389
Syntax: set service-profile name user-idle-timeout seconds
name
seconds
Defaults: The default user idle timeout is 180 seconds (3 minutes).
Access: Enabled.
Examples: The following command increases the user idle timeout to 360 seconds (6 minutes):
DWS-1008# set service-profile sp1 user-idle-timeout 360
success: change accepted.
See Also:
• set service-profile idle-client-probing
• set service-profile web-portal-session-timeout
• show service-profile
Service profile name.
Number of seconds a client is allowed to remain idle before MSS changes the
session to the Dissociated state. You can specify from 20 to 86400 seconds.
To disable the timer, specify 0.
set service-profile web-portal-acl
Changes the ACL name MSS uses to filter a Web-Portal user’s traffic during authentication.
Use this command if you create a custom Web-Portal ACL to allow more than just DHCP traffic
during authentication. For example, if you configure an ACL that allows a Web-Portal user to
access a credit card server, use this command to use the custom ACL for Web-Portal users that
associate with the service profile’s SSID.
Syntax: set service-profile name web-portal-acl aclname
name
aclname
Defaults: By default, a service profile’s web-portal-acl option is unset. However,when you
change the service profile’s auth-fallthru option to web-portal, MSSsets the web-portal-acl
option to portalacl. (MSS automatically creates the portalacl ACL the first time you set any service
profile’s auth-fallthru option to web-portal.)
Service profile name.
Name of the ACL to use for filtering Web-Portal user traffic during
authentication.