Filter
Top Products
D-Link DWS-1008 CLI Manual 183
start-stop Sends accounting records at the start and end of a network session.
stop-only Sends accounting records only at the end of a network session.
method1-4 At least one of up to four methods that MSS uses to process accounting records.
Specify one or more of the following methods in priority order. If the first method
does not succeed, MSS tries the second method, and so on.
A method can be one of the following:
• local—Stores accounting records in the local database on the switch. When
the local accounting storage space is full, MSS overwrites older records with
new ones.
• server-group-name—Stores accounting records on one or more Remote
Authentication Dial-In User Service (RADIUS) servers. You can also enter the
names of existing RADIUS server groups as methods.
Defaults: Accounting is disabled for all users by default.
Access: Enabled.
Usage: For network users with start-stop accounting whose records are sent to a RADIUS server,
MSS sends interim updates to the RADIUS server when the user roams.
Examples: The following command issues start-and-stop accounting records at the local
database for administrator Natasha, when she accesses the switch using Telnet or Web View:
DWS-1008# set accounting admin Natasha start-stop local
success: change accepted.
See Also:
• clear accounting
• show accounting statistics
set accounting {dot1x | mac | web | last-resort}
Sets up accounting services for specified wireless users with network access, and defines the
accounting records and where they are sent.
Syntax: set accounting {dot1x | mac | web | last-resort} {ssid ssid-name | wired}
{user-glob | mac-addr-glob} {start-stop | stop-only}
method1 [method2] [method3] [method4]