Filter
Top Products
D-Link DWS-1008 CLI Manual 365
set service-profile cipher-tkip
Disables or reenables Temporal Key Integrity Protocol (TKIP) encryption in a service profile.
Syntax: set service-profile name cipher-ccmp {enable | disable}
name
enable
disable
Defaults: When the WPA IE is enabled, TKIP encryption is enabled by default.
Access: Enabled.
Usage: To use TKIP, you must also enable the WPA IE.
Examples: The following command disables TKIP encryption in service profile sp2:
DWS-1008# set service-profile sp2 cipher-tkip disable
success: change accepted.
See Also:
• set service-profile cipher-ccmp
• set service-profile cipher-wep104
• set service-profile cipher-wep40
• set service-profile wpa-ie
• show service-profile
Service profile name.
Enables TKIP encryption for WPA clients.
Disables TKIP encryption for WPA clients.
set service-profile cipher-wep104
Enables dynamic Wired Equivalent Privacy (WEP) with 104-bit keys, in a service profile.
Syntax: set service-profile name cipher-wep104 {enable | disable}
name
enable
disable
Service profile name.
Enables 104-bit WEP encryption for WPA clients.
Disables 104-bit WEP encryption for WPA clients.