Filter
Top Products
D-Link DWS-1008 CLI Manual 198
Replace operator with one of the following operands:
• eq—Applies the location policy rule to all users assigned VLAN names
matching vlan-glob.
• neq—Applies the location policy rule to all users assigned VLAN
names not matching vlan-glob.
For vlan-glob, specify a VLAN name, use the double-asterisk wildcard
character (**) to specify all VLAN names, or use the single-asterisk
wildcard character (*) to specify a set of VLAN names up to or following
the first delimiter character, either an at sign (@) or a period (.). (For
details, see “VLAN Globs” on page 6.)
user operator user-glob Username and condition by which to determine if the location policy
rule applies. Replace operator with one of the following operands:
• eq—Applies the location policy rule to all usernames matching
user-glob.
• neq—Applies the location policy rule to all usernames not matching
user-glob.
For user-glob, specify a username, use the double-asterisk wildcard
character (**) to specify all usernames, or use the single-asterisk
wildcard character (*) to specify a set of usernames up to or following
the first delimiter character, either an at sign (@) or a period (.). (For
details, see “User Globs” on page 6.)
before rule-number Inserts the new location policy rule in front of another rule in the
location policy. Specify the number of the existing location policy rule.
(To determine the number, use the show location policy command.)
modify rule-number Replaces the rule in the location policy with the new rule. Specify the
number of the existing location policy rule. (To determine the number,
use the show location policy command.)
port port-list List of physical port(s) by which to determine if the location policy rule
applies.
Defaults: By default, users are permitted VLAN access and assigned security ACLs according
to the VLAN-Name and Filter-Id attributes applied to the users during normal authentication and
authorization.
Access: Enabled.
Usage: Only a single location policy is allowed per DWS-1008 switch. The location policy can
contain up to 150 rules. Once configured, the location policy becomes effective immediately. To
disable location policy operation, use the clear location policy command.