Filter
Top Products
D-Link DWS-1008 CLI Manual 32
Field Description
Memory Current size (in megabytes) of nonvolatile memory (NVRAM) and
synchronous dynamic RAM (SDRAM), plus the percentage of total memory
space in use, in the following format:
NVRAM size /SDRAM size (percent of total)
Total Power Over
Ethernet
Total power that the DWS-1008 is currently supplying to its directly connected
access points, in watts.
See Also:
• clear system
• set system contact
• set system countrycode
• set system idle-timeout
• set system ip-address
• set system location
• show system name
show tech-support
Provides an in-depth snapshot of the status of the DWS switch, which includes details about
the boot image, the version, ports, and other configuration values. This command also displays
the last 100 log messages.
Syntax: show tech-support [file [subdirname/] filename]
[subdirname/]filename
Defaults: None.
Access: Enabled.
Usage: Enter this command before calling D-Link Technical Support.
Examples: To store the location of the DWS-1008 switch in the switch’s configuration, type the
following command:
DWS-1008# set system location first-floor-bldg3
success: change accepted.
See Also:
• show boot
• show config
• set licenses
Optional subdirectory name, and a string up to 32 alphanumeric
characters. The command’s output is saved into a file with the
specified name in nonvolatile storage.