Filter
Top Products
D-Link DWS-1008 CLI Manual 399
TxUniPkt TxUniByte RxPkt UndcrptPkt
TxMultiPkt TxMultiByte RxByte UndcrptByte
PhyErr
1.0: 1017 0 10170 0 14 8347 0 0 3964
2.0: 5643 55683 822545 8697520 3 1670 0 0 8695
5.5: 0 0 0 0 5 258 0 0 4
6.0: 0 0 0 0 0 0 0 0 51
9.0: 0 0 0 0 1 172 0 0 53
11.0: 0 0 0 0 17 998 0 0 35
12.0: 0 0 0 0 0 0 0 0 26
18.0: 0 0 0 0 0 0 0 0 38
24.0: 0 0 0 0 0 0 0 0 47
36.0: 0 0 0 0 0 0 0 0 1
48.0: 0 0 0 0 1 68 0 0 29
54.0: 0 0 0 0 0 0 0 0 5
TOTL: 6660 55683 832715 8697520 41 11513 0 0 12948
...
The following table describes the fields in this display:
Field Description
DAP
Port
Distributed AP number.
DWS-1008 port number (if the AP is directly connected to the DWS-1008 and
the DWS-1008 port is configured as an AP access port).
radio
Radio number.
LastPktXferRate
Data transmit rate, in Mbps, of the last packet received by the
DWL-8220AP access point.
NumCntInPwrSave
Number of clients currently in power save mode.
LastPktRxSigStrength
Signal strength, in dBm, of the last packet received by the
DWL-8220AP access point.
LastPktSigNoiseRatio
Signal-to-noise ratio (SNR), in decibels (dB), of the last packet received by the
DWL-8220AP access point.
This value indicates the strength of the radio signal above the noise floor. For
example, if the noise floor is -88 and the signal strength is -68, the SNR is 20.
If the value is below 10, this indicates a weak signal and might indicate a problem
in the RF environment.
TKIP Pkt Transfer Ct
Total number of TKIP packets sent and received by the radio.