Filter
Top Products
D-Link DWS-1008 CLI Manual 476
acl-name Security ACL name. ACL names must be unique within the switch, must start
with a letter, and are case-insensitive. Specify an ACL name of up to 32 of the
following characters:
• Letters a through z and A through Z
• Numbers 0 through 9
• Hyphen (-), underscore (_), and period (.)
D-Link recommends that you do not use the same name with different
capitalizations for ACLs. For example, do not configure two separate ACLs
with the names acl_123 and ACL_123.
Note: In an ACL name, do not include the term all, default-action, map, help,
or editbuffer.
permit Allows traffic that matches the conditions in the ACE.
cos cos For permitted packets, a class-of-service (CoS) level for packet handling.
Specify a value from 0 through 7:
• 1 or 2—Background. Packets are queued in AP forwarding queue 4.
• 0 or 3—Best effort. Packets are queued in AP forwarding queue 3.
• 4 or 5—Video. Packets are queued in AP forwarding queue 2. Use CoS
level 4 or 5 for voice over IP (VoIP) packets other than SpectraLink
Voice Priority (SVP).
• 6 or 7—Voice. Packets are queued in AP forwarding queue 1. Use 6 or
7 only for VoIP phones that use SVP, not for other types of traffic.
deny Blocks traffic that matches the conditions in the ACE.
protocol IP protocol by which to filter packets:
• ip
• tcp
• udp
• icmp
• A protocol number between 0 and 255