Filter
Top Products
D-Link DWS-1008 CLI Manual 204
Attribute Description Valid Value(s)
vlan-name
(network access
mode only)
Virtual LAN (VLAN) assignment.
Note: On some RADIUS servers, you might need
to use the standard RADIUS attribute
Tunnel-Pvt-Group-ID, instead of VLAN-Name.
Name of a VLAN that you want the user to
use.
acct-interim-interval
Interval in seconds between accounting updates,
if start-stop accounting mode is enabled.
Number between 180 and 3,600 seconds, or 0
to disable periodic accounting updates.
The switch ignores the acct-interim-interval
value and issues a log message if the value is
below 60 seconds.
Note: If both a RADIUS server and the switch
supply a value for the acct-interim-interval
attribute, then the value from the switch takes
precedence.
Examples: The following command assigns input access control list (ACL) acl-03
to filter the packets from a user at MAC address 01:02:03:04:05:06:
DWS-1008# set mac-user 01:02:03:04:05:06 attr filter-id acl-03.in
success: change accepted.
The following command restricts a user at MAC address 06:05:04:03:02:01 to network access
between 7 p.m. on Mondays and Wednesdays and 7 a.m. on Tuesdays and Thursdays:
DWS-1008# set mac-user 06:05:04:03:02:01 attr time-of-day
mo1900-1159,tu0000-0700,we1900-1159,th0000-0700
success: change accepted.
See Also:
• clear mac-user attr
• show aaa