Filter
Top Products
D-Link DWS-1008 CLI Manual 300
Examples: The following example removes subdirectory corp2:
DWS-1008# rmdir corp2
success: change accepted.
See Also:
• dir
• mkdir
save config
Saves the running configuration to a configuration file.
Syntax: save config [filename]
filename Name of the configuration file. Specify between 1 and 128
alphanumeric characters, with no spaces.
To save the file in a subdirectory, specify the subdirectory name,
followed by a forward slash, in front of the filename. For example:
backup_configs/config_c.
Defaults: By default, MSS saves the running configuration as the configuration filename used
during the last reboot.
Access: Enabled.
Usage: If you do not specify a filename, MSS replaces the configuration file loaded during the
most recent reboot. To display the filename of the configuration file MSS loaded during the most
recent reboot, use the show boot command.
The command completely replaces the specified configuration file with the running
configuration.
Examples: The following command saves the running configuration to the configuration file
loaded during the most recent reboot. In this example, the filename used during the most recent
reboot is configuration.
DWS-1008# save config
Configuration saved to configuration.
The following command saves the running configuration to a file named testconfig1:
DWS-1008# save config testconfig1
Configuration saved to testconfig1.
See Also:
• load config
• show boot
• show config