Filter
Top Products
D-Link DWS-1008 CLI Manual 70
show fdb count
Lists the number of entries in the forwarding database.
Syntax: show fdb count {perm | static | dynamic} [vlan vlan-id]
perm Lists the number of permanent entries. A permanent entry does not age out and
remains in the database even after a reboot, reset, or power cycle.
static Lists the number of static entries. A static entry does not age out, but is removed
from the database after a reboot, reset, or power cycle.
dynamic Lists the number of dynamic entries. A dynamic entry is automatically removed
through aging or after a reboot, reset, or power cycle.
vlan vlan-id VLAN name or number. Entries are listed for only the specified VLAN.
Defaults: None.
Access: All.
Examples: The following command lists the number of dynamic entries that the forwarding
database contains:
DWS-1008# show fdb count dynamic
Total Matching Entries = 2
See Also:
• show fdb
show security l2-restrict
Displays configuration information and statistics for Layer 2 forwarding restriction.
Syntax: show security l2-restrict [vlan vlan-id | all]
vlan-id VLAN name or number.
all Displays information for all VLANs.
Defaults: If you do not specify a VLAN name or all, information is displayed for all VLANs.
Access: Enabled.