Filter
Top Products
D-Link DWS-1008 CLI Manual 463
vlan vlan-id VLAN name or number. If you do not specify a VLAN, MSS displays the
multicast routers in all VLANs.
Defaults: None.
Access: All.
Examples: The following command displays the multicast routers in VLAN orange:
DWS-1008# show igmp mrouter vlan orange
Multicast routers for vlan orange
Port Mrouter-IPaddr Mrouter-MAC Type TTL
----------------------------------------------------------------------------------------
10 192.28.7.5 00:01:02:03:04:05 dvmrp 33
The table below describes the fields in this display.
Field Description
Multicast routers for vlan VLAN containing the multicast routers. Ports are listed separately for each VLAN.
Port Number of the physical port through which the switch can reach the router.
Mrouter-IPaddr IP address of the multicast router.
Mrouter-MAC MAC address of the multicast router.
Type
How the switch learned that the port is a multicast router port:
• conf — Static multicast port configured by an administrator
• madv—Multicast advertisement
• quer—IGMP query
• dvmrp—Distance Vector Multicast Routing Protocol (DVMRP)
• pimv1—Protocol Independent Multicast (PIM) version 1
• pimv2—PIM version 2
TTL
Number of seconds before this entry ages out if unused. For static multicast router
entries, the TTL value is undef. Static multicast router entries do not age out.
See Also:
• set igmp mrouter
• show igmp mrouter