Filter
Top Products
D-Link DWS-1008 CLI Manual 418
show dap global
Displays connection information for Distributed APs configured on an DWS-1008.
Syntax: show dap global [dap-num | serial-id serial-ID]
dap-num
serial-id
Defaults: None.
Access: Enabled.
Usage: Connections are shown only for the Distributed APs that are configured on the
DWS-1008 from which you enter the command.
Number of a Distributed AP for which to display configuration settings.
DWL-8220AP access point serial ID.
The following command displays information for all Distributed APs configured on this DWS-1008
that have active connections:
DWS-1008# show dap connection
Total number of entries: 1
Field Description
DAP
Connection ID you assigned to the Distributed AP.
If the connection is configured on another DWS-1008, this field contains a
hyphen ( - ).
Serial Id
Serial ID of the Distributed AP.
DAP IP Address
IP address assigned by DHCP to the Distributed AP.
DWS-1008 IP Address
System IP address of the DWS-1008 on which the AP has an active connection.
This is the switch that the AP used for booting and configuration and is using for
data transfer.
The following table describes the fields in the display:
DAP Serial Id DAP IP Address DWS-1008 IP Address
7 223344 10.10.4.88 10.9.9.11