Filter
Top Products
D-Link DWS-1008 CLI Manual 33
Port Commands
Use port commands to configure and manage individual ports and load-sharing port groups. This
chapter presents port commands alphabetically. Use the following table to locate commands in this
chapter based on their use.
set port type ap on page 51
set dap on page 42
set port type wired-auth on page 53
clear dap on page 34
clear port type on page 36
show port status on page 58
set port name on page 46
clear port name on page 36
set port on page 43
reset port on page 42
set port media-type on page 35
clear port media-type on page 36
set port speed on page 49
set port negotiation on page 47
set port poe on page 48
show port poe on page 57
set port trap on page 50
set port-group on page 44
clear port-group on page 35
set port mirror on page 46
clear port mirror on page 35
show port counters on page 58
monitor port counters on page 38
clear port counters on page 34
Port Type
Name
State
Interface Type
Speed
Autonegotiation
PoE
SNMP
Port Groups
Port Mirroring
Statistics