Filter
Top Products
D-Link DWS-1008 CLI Manual 486
show security acl map
Displays the VLANs, ports, and virtual ports on the switch to which a security ACL is assigned.
Syntax: show security acl map acl-name
acl-name Name of an existing security ACL for which to show static mapping. ACL
names must start with a letter and are case-insensitive.
Defaults: None.
Access: Enabled.
Examples: The following command displays the port to which security ACL acl_111 is mapped:
DWS-1008# show security acl map acl_111
ACL acl_111 is mapped to:
Port 4 in
See Also:
• clear security acl map
• set security acl map
• show security acl
show security acl resource-usage
Displays statistics about the resources used by security ACL filtering on the switch.
Syntax: show security acl resource-usage
Defaults: None.
Access: Enabled.
Usage: Use this command with the help of D-Link Technical Support to diagnose an ACL resource
problem.