Filter
Top Products
D-Link DWS-1008 CLI Manual 326
indoors
outdoors
Defaults: The default antenna location is indoors.
Access: Enabled
Examples: The following command sets the antenna location for radio 1 on Distributed AP 22
to outdoors:
DWS-1008# set dap 22 radio 1 antenna-location outdoors
success: change accepted.
See Also:
• set {ap | dap} radio antennatype
Specifies that the external antenna is installed inside the building.
Specifies that the external antenna is installed outdoors.
set {ap | dap} radio antennatype
Sets the model number for an external antenna.
Syntax: set {ap port-list | dap dap-num} radio {1 antennatype ANT1060 | ANT1120 | ANT1180
| internal} | {2 antennatype ANT5060 | ANT5120 | ANT5180 | internal}
ap port-list
dap dap-num
radio 1
radio 2
radio 1 antennatype
radio 2 antennatype
List of ports connected to the DWL-8220AP access points on which
to set the channel.
Number of a Distributed AP on which to set the channel.
Radio 1 of the DWL-8220AP.
Radio 2 of the DWL-8220AP.
802.11b/g external antenna models:
• ANT1060 - 60° 802.11b/g antenna
• ANT1120 - 120° 802.11b/g antenna
• ANT1180 - 180° 802.11b/g antenna
• internal - Uses the internal antenna instead
802.11a external antenna models:
• ANT5060 - 60° 802.11a antenna
• ANT5120 - 120° 802.11a antenna
• ANT5180 - 180° 802.11a antenna
• internal - Uses the internal antenna instead