Filter
Top Products
D-Link DWS-1008 CLI Manual 383
The page is assumed to reside in the root directory on the DWS-1008. optionally specify a
different directory where the page resides.
This functionality occurs only when the enforce checks option is enabled for the service profile.
The enforce checks option is enabled by default.
Examples: The following command specifies success.html, which resides in the root directory
on the DWS-1008, as the page to load when a client passes the SODA agent checks:
DWS-1008# set service-profile sp1 soda success-page success.html
success: change accepted.
The following command specifies success.html, which resides in the soda-files directory on the
DWS-1008, as the page to load when a client passes the SODA agent checks:
DWS-1008# set service-profile sp1 soda success-page soda-files/success.html
success: change accepted.
See Also:
• set service-profile soda enforce-checks
• set service-profile soda mode
• show service-profile
set service-profile ssid-name
Configures the SSID name in a service profile.
Syntax: set service-profile name ssid-name ssid-name
name
ssid-name
Defaults: The default SSID type is crypto (encrypted) and the default name is dlink.
Access: Enabled.
Service profile name.
Name of up to 32 alphanumeric characters. You can include blank spaces
in the name, if you delimit the name with single or double quotation marks.
You must use the same type of quotation mark (either single or double) on
both ends of the string.