Filter
Top Products
D-Link DWS-1008 CLI Manual 62
clear security l2-restrict counters
Clear statistics counters for Layer 2 forwarding restriction.
Syntax: clear security l2-restrict counters [vlan vlan-id | all]
vlan-id VLAN name or number.
all Clears Layer 2 forwarding restriction counters for all VLANs.
Defaults: If you do not specify a VLAN or all, counters for all VLANs are cleared.
Access: Enabled.
Usage: To clear MAC addresses from the list of addresses to which clients are allowed to send
data, use the clear security l2-restrict command instead.
Examples: The following command clears Layer 2 forwarding restriction statistics for
VLAN abc_air:
DWS-1008# clear security l2-restrict counters vlan abc_air
success: change accepted.
See Also:
• clear security l2-restrict
• set security l2-restrict
• show security l2-restrict
clear vlan
Removes physical or virtual ports from a VLAN or removes a VLAN entirely.
Caution: When you remove a VLAN, MSS completely removes the VLAN from the configuration
and also removes all configuration information that uses the VLAN. If you want to remove only a
specific port from the VLAN, make sure you specify the port number in the command.
Syntax: clear vlan vlan-id [port port-list [tag tag-value]]
vlan-id VLAN name or number.
port port-list List of physical ports. MSS removes the specified ports from the VLAN. If you do
not specify a list of ports, MSS removes the VLAN entirely.
tag tag-value Tag number that identifies a virtual port. MSS removes only the specified virtual
port from the specified physical ports.