Filter
Top Products
D-Link DWS-1008 CLI Manual 251
set dot1x timeout supplicant
Sets the number of seconds that must elapse before the switch times out an authentication
session with a supplicant (client).
Syntax: set dot1x timeout supplicant seconds
seconds Specify a value between 1 and 65,535.
Defaults: The default is 30 seconds.
Access: Enabled.
Examples: Type the following command to set the number of seconds for authentication session
timeout to 300:
DWS-1008# set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
See Also:
• clear dot1x timeout auth-server
• show dot1x
set dot1x tx-period
Sets the number of seconds that must elapse before the switch retransmits an EAPoL packet.
Syntax: set dot1x tx-period seconds
seconds Specify a value between 1 and 65,535.
Defaults: The default is 5 seconds.
Access: Enabled.
Examples: Type the following command to set the number of seconds before the switch retransmits
an EAPoL packet to 300:
DWS-1008# set dot1x tx-period 300
success: dot1x tx-period set to 300.
See Also:
• clear dot1x tx-period
• show dot1x