Filter
Top Products
D-Link DWS-1008 CLI Manual 248
See Also:
• clear dot1x max-req
• show dot1x
set dot1x port-control
Determines the 802.1X authentication behavior on individual wired authentication ports or groups
of ports.
Syntax: set dot1x port-control {forceauth | forceunauth | auto} port-list
forceauth Forces the specified wired authentication port(s) to unconditionally authorize
all 802.1X authentication attempts, with an EAP success message.
forceunauth Forces the specified wired authentication port(s) to unconditionally reject all
802.1X authentication attempts with an EAP failure message.
auto Allows the specified wired authentication ports to process 802.1X
authentication normally as determined for the user by the set authentication
dot1X command.
port-list One or more wired authentication ports for which to set 802.1X port
control.
Defaults: By default, wired authentication ports are set to auto.
Access: Enabled.
Usage: This command affects only wired authentication ports.
Examples: The following command forces port 6 to unconditionally accept all 802.1X authentication
attempts:
DWS-1008# set dot1x port-control forceauth 6
success: authcontrol for 19 is set to FORCE-AUTH.
See Also:
• show port status
• show dot1x