Filter
Top Products
D-Link DWS-1008 CLI Manual 304
• spantree
• system
• trace
• vlan
• vlan-fdb
If you do not specify a configuration area, nondefault information for all areas is displayed.
all Includes configuration items that are set to their default values.
Defaults: None.
Access: Enabled.
Usage: If you do not use one of the optional parameters, configuration commands that set
nondefault values are displayed for all configuration areas. If you specify an area, commands
are displayed for that area only. If you use the all option, the display also includes commands for
configuration items that are set to their default values.
Examples: The following command shows configuration information for VLANs:
DWS-1008# show config area vlan
# Configuration nvgen’d at 2004-5-21 19:36:48
# Image 3.0.0
# Model switch
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
See Also:
• load config
• save config
show version
Displays software and hardware version information for a switch and, optionally, for any attached
access points.
Syntax: show version [details]
details Includes additional software build information and information about
the AP access points configured on the switch.
Defaults: None.
Access: All.