Filter
Top Products
D-Link DWS-1008 CLI Manual 76
Examples: The following command displays the default QoS settings:
DWS-1008# show qos default
Ingress QoS Classification Map (dscp-to-cos)
Ingress DSCP CoS Level
===============================================================
00-09 0 0 0 0 0 0 0 0 1 1
10-19 1 1 1 1 1 1 2 2 2 2
20-29 2 2 2 2 3 3 3 3 3 3
30-39 3 3 4 4 4 4 4 4 4 4
40-49 5 5 5 5 5 5 5 5 6 6
50-59 6 6 6 6 6 6 7 7 7 7
60-63 7 7 7 7
Egress QoS Marking Map (cos-to-dscp)
CoS Level 0 1 2 3 4 5 6 7
===============================================================
Egress DSCP 0 8 16 24 32 40 48 56
Egress ToS byte 0x00 0x20 0x40 0x60 0x80 0xA0 0xC0 0xE0
See Also:
• show qos dscp-table
show qos dscp-table
Displays a table that maps Differentiated Services Code Point (DSCP) values to their equivalent
combinations of IP precedence values and IP ToS values.
Syntax: show qos dscp-table
Defaults: None.
Access: Enabled.
Examples: The following command displays the table:
DWS-1008# show qos dscp-table
DSCP TOS precedence tos
dec hex dec hex
-------------------------------------------------------------------------------------------------------------------------
0 0x00 0 0x00 0 0
1 0x01 4 0x04 0 2
2 0x02 8 0x08 0 4
...
63 0x3f 252 0xfc 7 14
See Also:
• show qos