Filter
Top Products
D-Link DWS-1008 CLI Manual 260
The table below describes the fields of the show sessions admin, show sessions console,
and show sessions telnet displays.
show sessions admin, show sessions console, and show sessions
telnet Output
Field Description
Tty
The Telnet terminal number, or console for administrative users connected through the
console port.
Username Up to 30 characters of the name of an authenticated user.
Time (s) Number of seconds the session has been active.
Type
Type of administrative session:
• Console
• SSH
• Telnet
show sessions telnet client Output
Field Description
Session Session number assigned by MSS when the client session is established.
Server Address IP address of the remote device.
Server Port TCP port number of the remote device’s TCP server.
Client Port
TCP port number MSS is using for the client side of the session.
See Also:
• clear sessions
show sessions network
Displays summary or verbose information about all network sessions, or network sessions for a
specified username or set of usernames, MAC address or set of MAC addresses, VLAN or set
of VLANs, or session ID.
Syntax: Syntax show sessions network [user user-glob | mac-addr mac-addr-glob | ssid
ssid-name | vlan vlan-glob | session-id session-id | wired] [verbose]
user user-glob Displays all network sessions for a single user or set of users. Specify
a username, use the double-asterisk wildcard character (**) to specify all
usernames, or use the single-asterisk wildcard character (*) to specify a set
of usernames up to or following the first delimiter character—either an at
sign (@) or a period (.). (For details, see “User Globs” on page 6.)
mac-addr Displays all network sessions for a MAC address. Specify a MAC address in
mac-addr-glob hexadecimal numbers separated by colons (:). Or use the wildcard character
(*) to specify a set of MAC addresses. (For details, see “MAC Address Globs”
on page 7.)