Filter
Top Products
D-Link DWS-1008 CLI Manual 236
set radius server
Configures RADIUS servers and their parameters. By default, the switch automatically sets all
these values except the password (key).
Syntax: set radius server server-name [address ip-address] [auth-port port-number]
[acct-port port-number] [timeout seconds] [retransmit number] [deadtime minutes]
[[key string] | [encrypted-key string]] [author-password password]
server-name Unique name for this RADIUS server. Enter an alphanumeric string
of up to 32 characters, with no blanks.
address IP address of the RADIUS server. Enter the address in dotted decimal
ip-address notation.
auth-port UDP port that the switch uses for authentication and authorization.
port-number
acct-port UDP port that the switch uses for accounting.
port-number
timeout seconds Number of seconds the switch waits for the RADIUS server to
respond before retransmitting. You can specify from 1 to 65,535
seconds.
retransmit number Number of transmission attempts made before declaring an
unresponsive RADIUS server unavailable. You can specify from
1 to 100 retries.
deadtime minutes Number of minutes the switch waits after declaring an unresponsive
RADIUS server unavailable before retrying that RADIUS server.
Specify between 0 (zero) and 1440 minutes (24 hours). A zero value
causes the switch to identify unresponsive servers as available.
key string | Password (shared secret key) the switch uses to authenticate to
encrypted-key string RADIUS servers. You must provide the same password that is defined
on the RADIUS server. The password can be 1 to 64 characters long,
with no spaces or tabs.
• Use the key option to enter the string in its unencrypted form.
MSS encrypts the displayed form of the string in show config and
show aaa output.
• To enter the string in its encrypted form instead, use the
encrypted-key option. MSS does not encrypt the string you enter,
and instead displays the string exactly as you enter it.
author-password Number of minutes the switch waits after declaring an unresponsive
password RADIUS server unavailable before retrying that RADIUS server.
Specify between 0 (zero) and 1440 minutes (24 hours). A zero value
causes the switch to identify unresponsive servers as available.