Filter
Top Products
D-Link DWS-1008 CLI Manual 510
Usage: The debug level produces a lot of messages, many of which can appear to be somewhat
cryptic. Debug messages are used primarily by D-Link for troubleshooting and are not intended
for administrator use.
Examples: Type the following command to see the facilities for which you can view event
messages archived in the buffer:
DWS-1008# show log buffer facility ?
<facility name> Select one of: KERNEL, AAA, SYSLOGD, ACL, APM,
ARP, ASO, BOOT, CLI, CLUSTER, CRYPTO, DOT1X, NET, ETHERNET, GATEWAY,
HTTPD, IGMP, IP, MISC, NOSE, NP, RAND, RESOLV, RIB, ROAM, ROGUE, SM,
SNMPD, SPAN, STORE, SYS, TAGMGR, TBRIDGE, TCPSSL, TELNET, TFTP, TLS,
TUNNEL, VLAN, X509, XML, AP, RAPDA, WEBVIEW, EAP, FP, STAT, SSHD,
SUP, DNSD, CONFIG, BACKUP.
The following command displays logged messages for the AAA facility:
DWS-1008# show log buffer facility AAA
AAA Jun. 25 09:11:32.579848 ERROR AAA_NOTIFY_ERR: AAA got SM special
event (98) on locality 3950 which is gone
See Also:
• clear log
• show log config
show log config
Displays log configuration information.
Syntax: show log config
Defaults: None.
Access: Enabled.
Examples: To display how logging is configured, type the following command:
DWS-1008# show log config
Logging console: disabled
Logging console severity: DEBUG
Logging sessions: disabled
Logging sessions severity: INFO
Logging buffer: enabled
Logging buffer severity: WARNING
Logging trace: enabled
Logging trace severity: DEBUG
Logging buffer size: 10485760 bytes
Log marking: disabled
Log marking severity: NOTICE
Log marking interval: 300 seconds
Logging server: 172.21.12.19 port 514 severity EMERGENCY
Current session: disabled
Current session severity: INFO