Filter
Top Products
D-Link DWS-1008 CLI Manual 238
set server group
Configures a group of one to four RADIUS servers.
Syntax: set server group group-name members server-name1 [server-name2]
[server-name3] [server-name4]
group-name Server group name of up to 32 characters, with no spaces or tabs.
members The names of one or more configured RADIUS servers.
server-name1 You can enter up to four server names.
server-name2
server-name3
server-name4
Defaults: None.
Access: Enabled.
Usage: You must assign all group members simultaneously, as shown in the example. To enable
load balancing, use set server group load-balance enable.
Do not use the same name for a RADIUS server and a RADIUS server group.
Examples: To set server group shorebirds with members heron, egret, and sandpiper, type the
following command:
DWS-1008# set server group shorebirds members heron egret sandpiper
success: change accepted.
See Also:
• clear server group
• set server group load-balance
• show aaa