D-Link dws-1008 Switch User Manual


 
D-Link DWS-1008 CLI Manual 409
The following command displays the status of a Distributed AP access point:
DWS-1008# show ap status 1
The following command uses the terse option to display brief information for Distributed APs:
DWS-1008# show dap status terse
The following table describe the fields in these displays:
Port: 1, AP model: DWL-8220AP, manufacturer D-Link, name: AP01
====================================================
State: operational CPU info: IBM:PPC speed=266666664 Hz version=405GPr
id=0x28b08a1e047f1d0f ram=33554432 s/n=0333000288 hw_rev=A3
Uptime: 3 hours, 44 minutes, 28 seconds
Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)
operational channel: 1 operational power: 15 base mac: 00:0b:0e:00:d1:00
bssid1: 00:0b:0e:00:d1:00, ssid: public bssid2: 00:0b:0e:00:d1:02, ssid: empl-net
bssid3: 00:0b:0e:00:d1:04, ssid: mycorp-tkip
Radio 2 type: 802.11a, state: configure succeed [Enabled]
operational channel: 48 operational power: 11 base mac: 00:0b:0e:00:d1:01
bssid1: 00:0b:0e:00:d1:01, ssid: public bssid2: 00:0b:0e:00:d1:03, ssid: empl-net
bssid3: 00:0b:0e:00:d1:05, ssid: mycorp-tkip
Total number of entries: 4
Operational: 1, Image Downloading: 0, Unknown: 3, Other: 0
Flags: o = operational, b = booting, d = image downloading
c = configuring, f = configuration failed a = auto DAP,
i = insecure
Port Flg IP Address Model Mac Address Radio 1 Radio 2 Uptime
3 --- DWL-8220AP D ?/? D ?/? 0d 0h 0m 0s
Dap 1 --- DWL-8220AP D ?/? D ?/? 0d 0h 0m 0s
Dap 2 --- DWL-8220AP D ?/? D ?/? 0d 0h 0m 0s
Dap100 oa- 10.8.255.11 DWL-8220AP 00:0b:0e:da:da:82 E 1/17 E36/11 0d 0h 0m17s