Filter
Top Products
D-Link DWS-1008 CLI Manual 494
port port-num Traces a port number. Specify a port number between 1 and 22.
user username Traces a user. Specify a username of up to 80 alphanumeric characters
with no spaces.
level level Determines the quantity of information included in the output. You can
set the level with an integer from 1 to 10, where level 10 provides the
most information. Levels 1 through 5 provide user-readable information.
If you do not specify a level, level 5 is the default.
Defaults: The default trace level is 5.
Access: Enabled.
Examples: The following command starts a trace for the 802.1X sessions for MAC address
00:01:02:03:04:05:
DWS-1008# set trace dot1x mac-addr 00:01:02:03:04:05:
success: change accepted.
See Also:
• clear trace
• show trace
set trace sm
Traces session manager activity.
Syntax: set trace sm [mac-addr mac-address] [port port-num] [user username] [level level]
mac-addr mac-address Traces a MAC address. Specify a MAC address, using colons to
separate the octets (for example, 00:11:22:aa:bb:cc).
port port-num Traces a port number. Specify a port number between 1 and 22.
user username Traces a user. Specify a username of up to 80 alphanumeric characters,
with no spaces.
level level Determines the quantity of information included in the output. You can
set the level with an integer from 1 to 10, where level 10 provides the
most information. Levels 1 through 5 provide user-readable information.
If you do not specify a level, level 5 is the default.