Filter
Top Products
D-Link DWS-1008 CLI Manual 79
clear ip dns server
Removes a DNS server from a DWS-1008 switch configuration.
Syntax: clear ip dns server ip-addr
ip-addr IP address of a DNS server.
Defaults: None.
Access: Enabled.
Examples: The following command removes DNS server 10.10.10.69 from a switch’s
configuration:
DWS-1008# clear ip dns server 10.10.10.69
success: change accepted.
See Also:
• clear ip dns domain
• set ip dns
• set ip dns domain
• set ip dns server
• show ip dns
clear ip route
Removes a route from the IP route table.
Syntax: clear ip route {default | ip-addr mask | ip-addr/mask-length} default-router
default Default route. Note: default is an alias for IP address 0.0.0.0/0.
ip-addr mask IP address and subnet mask for the route destination, in dotted decimal
notation (for example, 10.10.10.10 255.255.255.0).
ip-addr/mask-length IP address and subnet mask length in CIDR format
(for example, 10.10.10.10/24).
default-router IP address, DNS hostname, or alias of the next-hop router.