Filter
Top Products
D-Link DWS-1008 CLI Manual 217
1. Open the PKCS#7 object file with an ASCII text editor such as Notepad or vi.
2. Enter the crypto certificate command on the CLI command line.
3. When MSS prompts you for the PEM-formatted certificate, paste the PKCS#7 object file
onto the command line.
The switch verifies the validity of the public key associated with this certificate before installing
it, to prevent a mismatch between the switch’s private key and the public key in the installed
certificate.
Examples: The following command installs a certificate:
DWS-1008# crypto certificate admin
Enter PEM-encoded certificate
-----BEGIN CERTIFICATE-----
MIIBdTCP3wIBADA2MQswCQYDVQQGEwJVUzELMAkGA1UECBMCQOEx
GjAYBgNVBAMU EXR1Y2hwdWJzQHRycHouY29tMIGfMAOGCSqGSIb3DQ
EBAQAA4GNADCBiQKBgQC4 .....
2L8Q9tk+G2As84QYLm8wmVY>xP56M;CUAm908C2foYgOY40=
-----END CERTIFICATE-----
See Also:
• crypto generate request
• crypto generate self-signed
crypto generate key
Generates an RSA public-private encryption key pair that is required for a Certificate Signing
Request (CSR) or a self-signed certificate. For SSH, generates an authentication key.
Syntax: crypto generate key {admin | eap | ssh | web}
{128 | 512 | 1024 | 2048}
admin Generates an administrative key pair for authenticating the switch to or
Web View.
eap Generates an EAP key pair for authenticating the switch to 802.1X supplicants
(clients).
ssh Generates a key pair for authenticating the switch to Secure Shell (SSH)
clients.
web Generates an administrative key pair for authenticating the switch to WebAAA
clients.