Filter
Top Products
D-Link DWS-1008 CLI Manual 362
set service-profile beacon
Disables or reenables beaconing of the SSID managed by the service profile.
An AP radio responds to an 802.11 probe any request with only the beaconed SSID(s). For
a nonbeaconed SSID, radios respond only to directed 802.11 probe requests that match the
nonbeaconed SSID’s SSID string.
When you disable beaconing for an SSID, the radio still sends beacon frames, but the SSID
name in the frames is blank.
Syntax: set service-profile name beacon {enable | disable}
name
enable
disable
Defaults: Beaconing is enabled by default.
Access: Enabled.
Examples: The following command disables beaconing of the SSID managed by service profile
sp2:
DWS-1008# set service-profile sp2 beacon disable
success: change accepted.
See Also:
• set radio-profile beacon-interval
• set service-profile ssid-name
• set service-profile ssid-type
• show service-profile
Service profile name.
Enables beaconing of the SSID managed by the service profile.
Disables beaconing of the SSID managed by the service profile.
set service-profile cac-mode
Configures the Call Admission Control (CAC) mode.
Syntax: set service-profile name cac-mode {none | session}