Filter
Top Products
D-Link DWS-1008 CLI Manual 396
List of ports connected to the DWL-8220AP access point(s) for which to display
configuration settings.
Number of a Distributed AP for which to display configuration settings.
Shows configuration information for radio 1.
Shows configuration information for radio 2. (This option does not apply to
single-radio models.)
show {ap | dap} config
Displays global and radio-specific settings for a DWL-8220AP access point.
Syntax: show ap config [port-list [radio {1 | 2}]]
Syntax: show dap config [dap-num [radio {1 | 2}]]
port-list
dap-num
radio 1
radio 2
Defaults: None.
Access: Enabled.
Usage: MSS lists information separately for each DWL-8220AP access point.
Examples: The following example shows configuration information for a DWL-8220AP access
point on port 2:
DWS-1008# show ap config 2
The following example shows configuration information for a Distributed AP access point
configured on connection 1:
DWS-1008# show dap config 1
Port 2: AP model: DWL-8220AP, POE: enable, bias: high, name: DWL-8220AP02
boot-download-enable: YES force-image-download: NO load balancing group: none
location: The conference room contact: Bob the IT guy
Radio 1: type: 802.11g, mode: disabled, channel: 6 tx pwr: 1, profile: default auto-tune
max-power: default
Radio 2: type: 802.11a, mode: disabled, channel: 36 tx pwr: 1, profile: default
auto-tune max-power: default
Dap 1: serial-id: 12345678, AP model: DWL-8220AP, bias: high, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3 boot-download-enable:
YES
force-image-download: NO load balancing group: none
location: The conference room contact: Bob the IT guy
Radio 1: type: 802.11g, mode: disabled, channel: 6 tx pwr: 1, profile: default
auto-tune max-power: default
Radio 2: type: 802.11a, mode: disabled, channel: 36 tx pwr: 1, profile: default
auto-tune max-power: default