Filter
Top Products
Advanced Guide
> Printing Using the Operation Panel of the Machine > Copying >
Making Copies
> Reducing or Enlarging
a Copy
Reducing or Enlarging a Copy
1.
Make sure that the machine is turned on.
2.
Press the
COPY
button.
3.
Load paper.
4.
Load the original document on the Platen Glass or in the ADF.
Note
Refer to
Loading Paper / Originals
for how to load the original on the Platen Glass or in the
ADF.
5.
Press the
Settings
button.
6.
Use the button to select the reduction/enlargement method, then press the
OK
button.
Ex:
Note
Some of reduction/enlargement methods are not available depending on the copy method.
Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
(A) A5
(B) A4
Use the
button to select a preset ratio to match the size of your original document and printing
paper, then press
OK
button.
Magnification
You can specify the copy ratio as a percentage to reduce or enlarge copies.
(A) 125%
Use the
button or the Numeric buttons to specify the reduction or enlargement ratio (25 - 400
%), then press
OK
button.
Press and hold down the
button to quickly advance through the ratios. For details, refer to
Key
Page 355 of 973 pagesReducing or Enlarging a Copy