Cannon MX340 All in One Printer User Manual


 
Advanced Guide
>
Scanning
>
Scanning with Using the Operation Panel of the Machine > Forwarding Scanned Data to
PC Using the Operation Panel of the Machine
Forwarding Scanned Data to PC Using the Operation Panel of
the Machine
You can forward scanned data to the PC using the Operation Panel of the machine.
Before forwarding scanned data to the PC, confirm the following:
The necessary application software (MP Drivers and MP Navigator EX)
is installed.
If the application software (MP Drivers and MP Navigator EX) is not yet installed, insert the
Setup CD-
ROM into the computer's disc drive, then perform Custom Install and select MP Drivers and MP
Navigator EX.
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable when scanning images with the machine, or when the
computer is in the sleep or standby mode.
If you perform scanning via a network connection, make sure that all the required settings have been
specified. For details, refer to Network Scan Settings
.
The destination and the file name are specified in MP Navigator EX.
You can specify the destination and the file name in MP Navigator EX. For details on how to perform
settings or the initial settings, refer to
Scanner Button Settings Tab (Save to PC)
.
1.
Make sure that the machine is turned on.
2.
Press the
SCAN
button.
If you forward the data to the USB-connected computer:
Press the
Menu
button to display the screen for selecting to which you save the data.
If you forward the data to the network-connected computer:
The screen for selecting to which you save the data is displayed.
Note
If PC scan standby is displayed on the LCD after you press the
SCAN
button, press the Menu
button to display the screen for selecting to which you save the data.
3.
Use the
button to select PC, then press the
OK
button.
4.
Use the
button to select the PC to forward the scanned data, then press the
OK
button.
Note
If you select Local (USB) in the Select PC screen, the data is forwarded to the USB-connected
computer.
5.
Use the
button to select the document type, then press the
OK
button.
Page 378 of 973 pagesForwarding Scanned Data to PC Using the Operation Panel of the Machine