Filter
Top Products
Advanced Guide
>
Troubleshooting
> Document Jams in the ADF
Document Jams in the ADF
Important
When you turn off the machine to remove the jammed document, make sure of the following.
While the machine is receiving a fax (in memory), you cannot turn off the machine. Turn it off
after receiving the fax. Do not disconnect the power plug while the machine is receiving a fax. If
you disconnect the power plug, all the documents stored in memory are deleted.
If the
Stop button is pressed while the machine is scanning the document:
If you press the
Stop
button during scanning, Document in ADF Press [OK] appears on the LCD.
Press the
OK
button so that the remaining document is automatically fed out.
Removing the jammed document from the Document Tray:
Remove the document following the procedure below.
1.
If printing is in progress, press the
Stop
button.
2.
Turn off the machine.
3.
If a multi-page document is loaded, remove any pages other than the jammed page from
the ADF, then open the Document Feeder Cover.
4.
Pull out the jammed document from the ADF.
Page 852 of 973 pagesDocument Jams in the ADF