Filter
Top Products
Advanced Guide
Troubleshooting
Contents
>
Faxing > Using Various Receiving Functions
Using Various Receiving Functions
The machine has various receiving functions as follows.
For details, refer to the on-screen manual:
Advanced Guide
.
Fax Reception Rejection
The machine can be set to reject faxes from specific senders. The fax reception rejection can be set
for the faxes sent with no sender information, the numbers not registered to the coded speed dial,
or the numbers registered to the rejected numbers.
Registration to Rejected numbers can be performed on a computer using Speed Dial Utility
supplied with the machine.
Remote Reception
If the machine is located away from the telephone, pick up the handset of the telephone connected
to the machine and dial 25 (the remote reception ID) to receive faxes (remote reception).
The remote reception can be enabled or disabled with Remote RX.
Select ON to change Remote RX ID (remote reception ID).
Settings for Receiving Faxes
The various settings of the machine for receiving faxes are listed below. Change the settings as
necessary.
For details, refer to the on-screen manual:
Advanced Guide
.
ECM RX
Receives faxes in ECM (Error Correction Mode). When the sender's fax machine is compatible with
ECM, it resends the fax after correcting errors automatically. Select ON to receive a color fax.
Fax priority mode
Selects the detailed settings such as the ring start time, telephone ring time, and default action
when the receive mode is set to Fax priority mode.
Ring count
Selects the number of times to ring the external telephone when a call incomes.
Page 49 of 973 pagesUsing Various Receiving Functions