Filter
Top Products
(1)
ON button (POWER lamp)
Turns the power on or off. Lights or flashes green to indicate the power status. Before turning on the
power, make sure that the Document Cover is closed.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the
POWER
lamp is not lit. If the power plug is disconnected from the wall outlet while the
POWER
lamp is lit or flashing, the machine may become unable to print properly since the
Print Head is not protected.
If the power plug is disconnected, the date/time settings will be reset and all documents
stored in memory will be lost. Send or print a necessary document, or save it on the USB
flash drive before disconnecting the power plug.
Note
The machine cannot receive faxes when the power is turned off.
The power cannot be turned off while the machine is sending or receiving a fax, or when
there are unsent faxes in the machine's memory.
(2)
FAX button
Switches the machine to the fax mode.
See
Selecting Mode
.
(3)
COPY button
Switches the machine to the copy mode.
See
Selecting Mode
.
(4)
SCAN button
Switches the machine to the scan mode.
See
Selecting Mode
.
(5)
Menu button
Displays the menu screen.
See Selecting Menu Item from Specified Mode.
(6)
Settings button
Used to change settings on the paper used for printing in the copy or fax mode, or scanning options for
saving scanned data on a computer or a USB flash drive in the scan mode.
See
Basic Operation on the Setting Options
.
(7)
LCD (Liquid Crystal Display)
Displays messages, menu items, and the operational status.
Note
The LCD will turn off if the machine is not operated for about 5 minutes. To restore the
display, press any button except the
ON
button or perform the print operation. The display
will be also restored when receiving faxes.
(8)
Numeric buttons
Page 8 of 973 pagesMain Components