Cannon MX340 All in One Printer User Manual


 
Advanced Guide
Troubleshooting
Contents
>
Other Usages
> Machine Settings
Machine Settings
This section describes the items you can set or change in the Fax settings or Device settings menu
available by pressing the
Menu
button.
For details on setting or changing, refer to the on-screen manual:
Advanced Guide
.
Fax settings
Receive mode set.
Selects a receive mode for faxing.
Memory reference
Allows you to print faxes in the memory, save them on the USB flash drive, and delete them from the
memory.
Print reports/lists
Prints the history of sent and received faxes and lists such as telephone number lists and user's
data lists.
TEL no. registration
Registers a fax/telephone number for a coded speed dial, group dial, and reject number.
FAX user settings
Configures the basic settings for faxing, such as auto print, user information settings, volume
control, RX ring level, telephone line type, etc.
Transmission settings
Configures the basic settings for sending faxes, such as ECM transmission, pause time settings,
auto redial, fax number re-entry, etc.
Reception settings
Configures the basic settings for receiving faxes, such as ECM reception, fax priority mode, fax
reception reject, etc.
Device settings
Print settings
Prevent abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amt.
Selects the amount of image that extends off the paper when selecting Borderless copy in Special
copy.
AutoPhotoFix setting
Page 78 of 973 pagesMachine Settings