Filter
Top Products
Installation 4−29
PB60019−01 Octel 200/300 S.4.1
Figure 4-10 Example of Server-to-Block Connections
Octel 200/300
Rear View
66M4-4W 66M4-4W
P1P6
For maximum configuration, three connector blocks and twelve 25-pair cables are required.
The actual wiring (cross-connections from the 66M4-4W connector block to the 66M block, or
equivalent), can be made in any manner consistent with good telephony practices. Follow these two
guidelines when punching down wires to ensure correct installation:
- Do not touch the pins on the connector block with your fingers or with dirty tools. The pins could
oxidize and open after a few months.
- Tip is always above ring on the block when a pair is punched down.