Filter
Top Products
Quick Reference Guide
Octel 200/300
Maintenance Commands
Octel 200/300 S.4.1 PB60019−01
Command
Type
InformationCommandSubject
Miscellaneous
Commands
(continued)
Message Waiting
Lamps
MWL RELITE Send commands to relight each message waiting
lamp that the Octel 200/300 has marked as ON.
MWOFF x Turns OFF lamp message waiting.
x = mailbox number. The maximum number of
digits is eight. For ALL, enter A.
Names Directory NAMESTAT Prints status of the Dial-by-Name directory (Names
Directory). Also provides overall figures for
Dial-by-Name; that is, the number of local names
stored and the number of network names stored.
Password PASS x y Sets the password.
x = password level
y = new password.
There are three password levels. Each password
may be a maximum of eight alphanumeric
characters, 0−9 and A−Z. All alpha characters must
be in capital letters.
Patch PAT x Used to implement fixes to the message server
software using the patch command. Refer to this
chapter for detailed information. x = the following:
Status = status and info for all current patches
Apply x = apply a patch to specified target
Apply All = applies all patches not yet applied
Remove x = removes patch from specified target
Remove All = removes all patches from server
Tone and DTMF PRT x Monitors and prints the tone and DTMF events.
This is a real time command.
x = port number to monitor
Port Mapping Status PRTMAP Displays information about the allocation of system
port numbers to ports configured in each slot.