Filter
Top Products
12-64 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
This step reformats the hard disk file system partition and creates and
initializes the filesystem directory structure.
Filename: @ (#) credir 5.8
Date: MM/DD/YY
F:CREDIR reformats the hard disk filesystem partition and
creates and initializes the filesystem directory structure
NOTE: AFTER BEGINNING THIS STEP, THE CURRENT FILESYSTEM is
−−−− COMPLETELY IRRETRIEVABLE −−−−
BE VERY CERTAIN YOU ARE READY TO PROCEED!!
MAKE SURE NO ERRORS HAVE OCCURRED DURING
PREVIOUS STEPS!!
To continue the procedure.
−−−− Press Return to continue −−−−
FKOUT 05 81 09
SETVAR DIRWRCHK 0
variable = DIRWRCHK, address = 0x2ax7f5, old value = 1,
new value = 0
Are you sure you want to change the value?
To change the value. The Octel 200/300 displays
HFORM
HFORM deletes all data on the hard disk file system.
Are you sure you want to do this?
To confirm your selection. When initialization is complete, the
Octel 200/300 prompts
HFORM completed successfully. Disk removed
CRE H:XBOOT.IM 88
.
.?
To confirm your selection and create the configuration files.
If no errors were detected, continue with the next step.
. F:MFGINIT allows F:LOADCODE to be run without doing
F:RESTORE for those occasions when there is no Release
configuration to restore (for example a new system).
Create the Directory
20. @SUBMIT F:CREDIR
Enter
21. Press Enter
22. :Y Enter
23. :Y
Enter
24. :Y Enter
25. @SUBMIT F:MFGINIT
Enter