Filter
Top Products
Installation and Maintenance Manual Master Index In-15
Octel 200/300 S.4.1PB60019-01
TIME, 6-18
UPINTG, 6-18, 6-36
Mitel Integration Card, 2-9
Mitel SX-100/SX-200 Analog Adaptive Integration,
10.2-1–10.2-40
installation, 10.2-17–10.2-33
maintenance commands, 10.2-34–10.2-37
PBX configuration, system options, 10.2-10
testing, 10.2-17–10.2-33
VMX System configuration, 10.2-13–10.2-16
Mitel SX-200 Digital Adaptive Integration
Called Party Identification
direct calls from external trunks, 10.1-2, 10.2-2
direct internal calls, 10.1-3, 10.2-3
forwarded external calls, 10.1-2, 10.2-2
forwarded internal calls, 10.1-4, 10.2-4
configuration requirements, 10.1-5
installation, 10.1-23–10.1-39
testing, 10.1-23–10.1-39
Mitel SX-2000 Adaptive Integration, 10.3-1–10.3-51
call coverage, 10.3-2
Called Party Identification, 10.3-1
direct calls from external trunks, 10.3-6
direct internal calls, 10.3-8
forwarded external calls, 10.3-7
forwarded internal calls, 10.3-8
configuration requirements, 10.3-10
hardware requirements, 10.3-10
installation, 10.3-25–10.3-44
installation checklist, 10.3-48–10.3-51
maintenance commands, 10.3-45
Message Waiting Indication, 10.3-2
MIC board installation, 10.3-36
PBX configuration
call rerouting, 10.3-18
MIC extensions, 10.3-15
naming conventions, 10.3-13
station extensions, 10.3-19
trunks and trunk groups, 10.3-17
PBX limitations, 10.3-11
software requirements, 10.3-10
testing, 10.3-25
testing procedure, 10.3-26–10.3-51
VMX System configuration, 10.3-20–10.3-24
Modem, 6-19
connecting, 4−16, 4−17
disable, 6-13
enable, 6-13
external, 4−16–4−17
internal, 4−17–4−18
MODIFY Command, NETWORK SCHEDULE
Table, 13−5
MODIFY command
LOCATION Table
collocated analog networking, 11−31
digital networking, 11−25
remote analog networking, 11−14
NUMBERING PLAN Table
collocated analog networking, 12−15
digital networking, 12−11
remote analog networking, 12−7
ROUTE Table
collocated analog networking, 10−8
remote analog networking, 10−4
SLOTS Table, DTIC card, 10-7
Modifying configuration database, 4−25
MON2 command, 6-13
Motherboard, system reset signal, 2-14
Motherboard assembly
diagram, 9-51
replacement, 9-51–9-56
Moves, adds, changes, 7-43–7-49
Moving the equipment on-site, 4−3
MPURG, 6-13
MPURGE Command, 6-61
Multilocation networking, INSTALL program, 1-13
Multiple network outcalls
networking, 1−3
remote analog networking, 2−3
Multiple network prefixes per location, 2−35
Multiport outcalling
networking, 1−3
remote analog networking, 2−3
secondary entries, collocated analog networking,
11−30
MWI. See Message Waiting Indication
MWLRECALC command, 6-13
MWOFF command, 6-13
MWRELITE command, 6-13
MX mode. See Message Center
N
Name retrieval, network, 9−8
NameNet
digital networking, 8−19
alphabetic (ASCII) name propagation, 8−19
alphabetic (ASCII) name verification, 8−19–8−22
OctelNet, 9−8–9−9
Names Directory. See DialbyName
Names propagation, network, 9−9