Filter
Top Products
Quick Reference Guide
Octel 200/300
Maintenance Commands
Octel 200/300 S.4.1PB60019−01
Command
Type
Subject Command Information
List
Commands
Client Controlled
Message pool
L CCM Displays the current message server utilization for
the Client Controlled Message pool (CCM). Used
for OctelAccess application development.
Client Error Log LC Used for OctelAccess troubleshooting. Lists the
errors caused by invalid client requests.
Drive Map L DMAP Provides disk information on the physical
characteristic of the disk drive.
Features LF Lists the features, the number of ports, mailboxes,
and storage hours the system is equipped with.
List Hardware Error
Table
LH Lists the Hardware Error Table.
Message Status LHEx Lists the status of a message.
x = message number
Integration Board L INT x y Lists the current state of the integration board, the
diagnostic status, and the status of the links, and
the pegs. Not used for DPNSS integration.
x = slot number
y = unit number
Mailbox
Configuration
LMx Lists the current configuration for a mailbox.
x = mailbox number
Mailbox
Configuration
LMxM Lists information about messages for a specific
mailbox.
x = mailbox number
M = required extension
Network Mailbox
Status
L NET x Displays message information for a network
location.
x = network location code