Filter
Top Products
Procedures 12-67
Octel 200/300 S.4.1
PB60019−01
Insert the Prompt disks as prompted. The following is displayed:
INSERT FLOPPY, PRESS RETURN WHEN READY
LANGUAGE: ENGLISH VERSION: xx
ARE YOU SURE YOU WANT TO DO THIS? Y
RESTORING PROMPT 8 ...DONE
RESTORING PROMPT 9 ...DONE
.
.
.
RESTORING PROMPT 510 ...DONE
RESTORING PROMPT 511 ...DONE
INSERT NEXT FLOPPY TO CONTINUE, PRESS RETURN WHEN READY
RESTORING PROMPT 811 ...DONE
RESTORING PROMPT 812 ...DONE
.
.
.
RESTORING PROMPT 1050 ...DONE
RESTORING PROMPT 1051 ...DONE
−−−−−−−−− RESTORE COMPLETE −−−−−−−−−
−−−−−−−− RESTORE −−−−−−−−
1. NAMES
2. GREETINGS
3. SCRIPT AND SEQUENTIAL MESSAGES
4. PERSONAL−DISTRIBUTION−LIST NAMES
5. PROMPTS
6. ALL NAMES, GREETINGS, SCRIPT AND SEQUENTIAL
MESSAGES, PERSONAL−DISTRIBUTION−LIST NAMES
SELECT RESTORE OPTION (1− 6, EMPTY LINE = DONE)
:
To return to the @ prompt.
. If more than one language was allocated, add additional language
now.
The number of prompt disks may vary by language.
To reload the system. Monitor the boot process until the SYSTEM
INITIALIZATION SUSPENDED! prompt appears. Press
Enter
until you
reach the password prompt.
You may see a message similar to the following. Proceed to step 35.
VCU STARTED
NO SLOT CONFIGURED IN THE SYSTEM. INSTALL PROCEDURES MUST
BE RUN. SYSTEM INITIALIZATION SUSPENDED.
:2 Enter
32. Press twice.Enter
33. Remove the last prompt disk
from the FD.
Reload the System
34. Press the lower button
on the CPU.